Lock Frame Tutorial 2
 | |  | |  | |  | |  |
After the lock is milled, the firing pin is modded. Bevel one edge of
the supplied block and clamp it to the firing pin, the beveled edge
goes at the joint of the firing pin body and riser. Use a TIG and keep
the heat low, use 316 stainless for a dab of filler.
the supplied block and clamp it to the firing pin, the beveled edge
goes at the joint of the firing pin body and riser. Use a TIG and keep
the heat low, use 316 stainless for a dab of filler.
