1919A4
Spade Grip Build Tutorial 4
When the welding is done break any sharp edges, degrease the parts
then blast and parkerize them.
then blast and parkerize them.
Assemble all the parts then drill a .096" hole in the wood and drive in
one of the short pins, these will keep the wood from rotating.
one of the short pins, these will keep the wood from rotating.
Here is the finished project ready to be installed on your gun. The
trigger travel should be correct for a KMP trigger, the travel can be
adjusted by bending the "U" portion on the upper plate up or down a little.
trigger travel should be correct for a KMP trigger, the travel can be
adjusted by bending the "U" portion on the upper plate up or down a little.