Bench Pod Kit
The kit contains everything needed to build the bench pod, pintle and
T&E mechanism as shown in the tutorial. The legs will need to be cut
and some parts require welding. You will need a drill press, sander /
grinder, hacksaw and welder to complete it. It will take about 3 hours to
complete.
Kit price: $
Priority mail shipping: $
T&E mechanism as shown in the tutorial. The legs will need to be cut
and some parts require welding. You will need a drill press, sander /
grinder, hacksaw and welder to complete it. It will take about 3 hours to
complete.
Kit price: $
Priority mail shipping: $
 | |  |
Benchpod Hardware kit 1
This is a basic hardware kit, it contains all the hardware items to build
the Pintle and T&E mechanism, included are:
1 9/16" or 5/8" pintle pin with ball lock retaining pin
1 7/16" T&E pin with retainer clip
1 1/2" sae bolt, nylock nut and belville spring
1 barrel nut
2 pieces of 3/8" all thread
2 coupling nuts, 3/8" and 7/16"
1 elevator nut with set screw
2 acorn nuts
2 3/8" belville springs
3 Stepped lock nuts
1 sheet rubber
Kit price: $38.00
Priority mail shipping: $6.75 shipping weight 2 lbs
the Pintle and T&E mechanism, included are:
1 9/16" or 5/8" pintle pin with ball lock retaining pin
1 7/16" T&E pin with retainer clip
1 1/2" sae bolt, nylock nut and belville spring
1 barrel nut
2 pieces of 3/8" all thread
2 coupling nuts, 3/8" and 7/16"
1 elevator nut with set screw
2 acorn nuts
2 3/8" belville springs
3 Stepped lock nuts
1 sheet rubber
Kit price: $38.00
Priority mail shipping: $6.75 shipping weight 2 lbs